Piranha® Pro Tooth Bar – Countersunk Bolt Holes, Reversible, 3+ times longer wear life than AR500 – The most wear and impact
resistant cutting edge you can buy. Engineered and built in the USA - Knoxville, TN.
The Patent Pending Piranha® Pro offers all the premium
features you want. It is reversible and has countersunk bolt holes meaning the bolt head is recessed into the bar so there is no bolt head to wear off on the bottom side. It is custom built
for your loader using a proprietary material proven to offer 3+ times the
wear life of AR500, 60% higher impact resistance than AR500, and a 25% increase
in strength over AR500. The Piranha Pro
is a multifunctional tool. Every contour is angled to provide grabbing power to clear brush and give more sharp edges to penetrate hard ground…and it’s sure to be the last
cutting edge you’ll buy.
Ships free to contiguous USA. Mounting hardware included. Coated with our signature hammered silver finish.
Unsure about your measurements? Contact us! It is likely we can give you the correct measurements. Additionally, each order is carefully reviewed, laid out in CAD, and checked against our database. After all, it doesn't do any good to take the most abrasion resistant (and expensive!) steel and turn it into scrap. We actually correct nearly 75% of orders that come in through our review process. If there is a question or concern about your order we will contact you prior to completion.
The Piranha Pro Bolt On is countersunk on the bottom
side meaning the head of the bolt is recessed into the bar so there is no bolt head
projecting from the bottom to wear off. Bolt sizes and
locations are based on the existing holes in the cutting edge on your loader
bucket. It is reversible giving you a straight edge for times when a smooth edge is desired while still protecting
the bucket.
The Piranha Pro Bolt On requires that your factory loader bucket have holes in the welded in cutting edge. If a replaceable edge is currently installed on your bucket you will need to remove it to allow installation.
You may also drill holes in your bucket if it did not come with them. In general, we would recommend 1/2" bolts (easier to drill) and an odd number of holes which allows you to spin it around the loosened center bolt to reverse it.
Please ensure that you double check all measurements and input. You may double check all inputs in the shopping cart before completing your order as well as in the order confirmation which is emailed after order completion. Do not assume you can modify once you receive it as it is virtually impossible to drill or modify the bar due to the material's characteristics including the constant throughout ability to harden significantly upon molecule movement. Due to extreme material characteristics, the Piranha Pro can not be modified or reworked. Any change/cancellation must be made within 24 hours of order completion.